Technical Specifications of a Second Hand Amusement Ride

The owner of the ride, or his delegate, must fill in this technical sheet to the best of his ability, recovering, where necessary, information from previous owners. The information will be used by the buyer to better evaluate the commercial value of the ride.

We recommend that you collect all the images, documents and receipts that prove the activities carried out so that they can be shown to the possible buyer. All these documents must be delivered to the buyer in original and we recommend that you keep a copy.

Click on SEND to send the data sheet to Fabbri Rides. You will receive a copy at the email address you have indicated. If you have made mistakes or inaccuracies, you must repeat the operation.

Read in English   |   Leer en Francés   |   Leer en Español   |   Leggi in Italiano

The person indicated must be the owner, or a person delegated by the owner.
Dimensions of the base and height in meters.
Indicate the power (KW) required for operation, or indicate the consumption in amperes (A).
For each vehicle, indicate the dimensions in transport condition in meters (length, width and height), the weight and the number of axles, also of the control cabin (if mobile). If the ride is to be loaded in containers, indicate the number and type. Indicate which vehicles, or containers, are included in the carousel price.
Such as lighting, operator's cabin, generator, music system and more.
List and date of the activities carried out on the carousel by the seller and the previous owners. By "modification" is meant any deviation from the original project made, for example but not limited to, any modification of the passenger vehicles, drive system, steel reinforcements to the structure, repair of welds, safety-related components and safety systems and control. For information refer to the European standard EN-13814 latest edition.
List and date of the important activities carried out on the ride by the seller and the previous owners. For example: replacement of the electronic DC/AC drive, PLC, bearings and pinions, refurbishment of gear boxes and motors, hydraulic motors and pumps, passenger's safety system.
(a) The European standard EN-13814 was first published in the year 2004. (b) The German standard DIN-4112 was first published in the year 1960. (c) The American standard ASTM F2291 it was first published in the year 2003. (d) The international standard ISO-17842 was first published in the year 2015.
Indicate here any other technical or commercial comment that may be useful.

For more information, or clarifications, you can contact us.

Fabbri Rides
Ph. +39 348 3959296
info@fabbrirides.com

468